These new frames of tooling applications are specifically designed to limit the problems of repetitive strain.

The mechanism now incorporates a completely new concept of ratchet design which enables the tool handles to be closed with a minimum of effort, but still maitaining the required crimping compression.

Although slightly larger in size than the conventional models the re-design of the handle and grips also assists in the very smooth and easy operation of the tool.

DRST 15 Triple Jaw Rachet Tool with controlled calibration suitable for crimping .25 to 6 mm² insulated terminals.	DRST-CA Ratchet Tool for co-axial cables with controlled calibration jaw sets RG58/59 but other combinations are available.
DRST-CE4 Six Jaw Ratchet Tool with controlled calibration suitable for crimping insulated and non-insulated cord ends 0.5 to 4 sq.mm.
DRST1516 Ratchet Tool with controlled calibration suitable for crimping non-insulated copper tube terminals 0.5 to 16 sq.mm.
DRSTF 15 Triple Jaw Rachet Tool with controlled calibration suitable for crimping non-insulated open barrel F crimps 1.25 to 6 mm².	DRST-CE16 Three Jaw Ratchet Tool with controlled calibration suitable for crimping insulated and non-insulated cord ends 6 to 16 mm².
DRST-HS Triple Jaw Rachet Tool with controlled calibration suitable for crimping insulated heat shrink terminals prior to application of heat gun. The compression ratio has no detrimental effect on the heat shrink 0.25 to 6 mm².	DRST-CE35 Two Jaw Ratchet Tool with controlled calibration suitable for crimping insulated and non-insulated cord ends 25 and 35 mm².
DRST-FL Double Jaw Ratchet Tool with controlled calibration suitable for crimping full insulated nylon right angle flag terminals 0.25 to 2.5 mm².	DRST-CE50 Two Jaw Ratchet Tool with controlled calibration suitable for crimping insulated and non-insulated cord ends 25 and 50 mm².
THE ABOVE TOOLS CAN BE CALIBRATED MANUALLY AND PROVED IN ACCORDANCE WITH ALL INTERNATIONAL STANDARDS